2006-2011 Camry Aurion · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

HINT:
Click here.


2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

  1. C134962
    Remove the 18 bolts and oil pan from the transaxle.

    NOTICE:
    Some fluid will remain in the oil pan. Remove all the pan bolts, and carefully remove the oil pan assembly.

  1. Remove the gasket from the oil pan.

  1. C134963E02
    Remove the 2 magnets from the oil pan.

  1. AT00103
    Examine particles in the oil pan.

    1. Collect any steel chips with the removed magnets. Look carefully at the chips and particles in the oil pan and on the magnets to see the type of wear which might be found in the transaxle.

      Result:
      Steel (magnetic):
      Bearing, gear and plate wear
      Brass (non-magnetic):
      Bearing wear


3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY

  1. C136687
    Remove the 2 bolts and oil strainer from the valve body.

  1. C136688E01
    Remove the O-ring from the oil strainer.


4. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

  1. C136689
    Remove the 11 bolts and valve body from the transaxle.

    NOTICE:
    When removing the transmission valve body assembly, be careful not to allow the transmission revolution sensor and the transaxle case to interfere with each other.


5. REMOVE TRANSMISSION WIRE

  1. C139241
    Disconnect the 9 transmission wire connectors.

  1. Remove the transmission wire from the clamp.

  1. C138518
    Remove the bolt, lock plate and transmission wire from the valve body.

← REMOVAL (Oct 2006 – May 2009)INSTALLATION (Oct 2006 – May 2009) →