2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY
  1. Install the bulb holder.

  1. E147644
    Using a "TORX" driver (T20), install the side turn signal light assembly with the 3 "TORX" screws.


2. INSTALL OUTER MIRROR COVER

  1. B163653
    Engage the 5 claws to install the outer mirror cover.


3. INSTALL OUTER REAR VIEW MIRROR GLASS
  1. Place a new outer rear view mirror glass over the motor plate. Ensure that the spring wire is positioned correctly in the guide track on the motor plate.

  1. Cover the mirror glass with a piece of cloth and apply even pressure to engage the glass with the motor plate.

  1. Adjust the mirror manually to check that the spring wire is correctly positioned. There should be a clicking sound during manual adjustment.

  1. Check that the mirror can be adjusted using the outer mirror switch.

  1. Adjust the mirror to the desired position.

← INSTALLATION (Oct 2006 – May 2009)COMPONENTS (Jun 2006 – Sep 2006) →