2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE OUTER REAR VIEW MIRROR GLASS

  1. B163654
    Adjust the mirror glass to the fully inboard and upward position.

  1. B163651E01
    Insert a screwdriver with the tip taped between the mirror housing and the mirror glass as shown in the illustration.

    NOTICE:
    The screwdriver should be securely wedged up against the back of the mirror glass.

  1. B163652E01
    Twist the screwdriver to separate the mirror glass from the motor plate.


2. REMOVE OUTER MIRROR COVER

  1. B163653
    Disengage the 5 claws and remove the outer mirror cover.


3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY

  1. E147644
    Using a "TORX" driver (T20), remove the 3 "TORX" screws.

  1. Pull out the bulb holder and remove the side turn signal light assembly.

← REMOVAL (Oct 2006 – May 2009)INSTALLATION (Oct 2006 – May 2009) →