2006-2011 Camry Aurion · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL FRONT BUMPER SIDE RETAINER LH

  1. B149383
    Engage the 2 claws and install the front bumper side retainer LH.

  1. Install the screw.


2. INSTALL FRONT BUMPER SIDE RETAINER RH

HINT:
Use the same procedure for the RH side and LH side.


3. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

  1. B159634
    Install the front bumper reinforcement sub-assembly with the 6 bolts.

  1. B159633E01
    Engage the 5 clamps.


4. INSTALL FRONT BUMPER ENERGY ABSORBER

  1. B232398
    Install the front bumper energy absorber to the front bumper reinforcement sub-assembly.


5. INSTALL RADIATOR GRILLE EMBLEM

HINT:
When installing the emblem, heat the radiator grille and emblem using a heat light.

Heating Temperature:
Item
Temperature
Radiator Grille
20 to 30°C (68 to 86°F)
Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the radiator grille and emblem excessively.

  1. Clean the radiator grille surface.

    1. Using a heat light, heat the radiator grille surface.

    2. Remove the double-sided tape from the radiator grille.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the emblem (if reusing the emblem).

    1. Using a heat light, heat the emblem.

    2. Remove the double-sided tape from the emblem.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the emblem.

  1. B232395E01
    Install the emblem.

    1. Using a heat light, heat the radiator grille and emblem.

    2. Remove the release paper from the emblem.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the emblem.


6. INSTALL RADIATOR GRILLE SUB-ASSEMBLY

  1. B232366
    Engage the 8 claws and install the radiator grille sub-assembly.


7. INSTALL LOWER RADIATOR GRILLE

  1. B232365
    Engage the 14 claws and install the lower radiator grille.


8. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)

  1. B232363
    Engage the 7 claws and install the front bumper hole cover LH.


9. INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT:
Use the same procedure for the RH side and LH side.


10. INSTALL FRONT BUMPER HOLE COVER LH (w/ Fog Light)

  1. B232364
    Engage the 7 claws and install the front bumper hole cover LH.


11. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

  1. E134242
    Install the fog light assembly with the screw.


12. INSTALL FRONT BUMPER HOLE COVER RH (w/ Fog Light)

HINT:
Use the same procedure for the RH side and LH side.


13. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:
Use the same procedure for the RH side and LH side.


14. INSTALL FRONT BUMPER LOWER COVER

  1. B222231
    Engage the 2 claws and install the front bumper lower cover.


15. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET

  1. B159629
    Engage the 2 claws and install the front bumper extension mounting bracket.

  1. Install the 2 screws.


16. INSTALL FRONT BUMPER EXTENSION LH (w/ Front Spoiler)

  1. B159625
    Install the front bumper extension LH with the 2 nuts.


17. INSTALL FRONT BUMPER EXTENSION RH (w/ Front Spoiler)

HINT:
Use the same procedure for the RH side and LH side.


18. INSTALL FRONT SPOILER

  1. Engage the 17 claws and install the front spoiler.

    B159626

  1. Install the 25 clips and 2 screws.


19. INSTALL HEADLIGHT CLEANER WASHER HOSE (w/ Headlight Cleaner System)

  1. Engage the 6 clamps and install the headlight cleaner washer hose.

    B222230


20. INSTALL HEADLIGHT CLEANER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

  1. E134339
    Engage the 2 claws.

  1. E134338
    Install the headlight cleaner actuator sub-assembly with the bolt.

  1. Connect the headlight cleaner hose.


21. INSTALL HEADLIGHT CLEANER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT:
Use the same procedure for the RH side and LH side.


22. INSTALL HEADLIGHT CLEANER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

  1. E128840
    Engage the 2 claws and install the headlight cleaner nozzle sub-assembly.


23. INSTALL HEADLIGHT CLEANER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT:
Use the same procedure for the RH side and LH side.


24. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Clearance Sonar System)

  1. E134855E01
    Install the No. 1 ultrasonic sensor retainer to the front bumper.

    NOTICE:
    Do not damage the bumper with the snap when installing the retainer.

    HINT:
    When installing the retainer, align the keyhole and snap as shown in the illustration.


25. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Clearance Sonar System)

  1. E135368
    Engage the 2 claws and install the No. 1 ultrasonic sensor.

  1. Connect the sensor connector.

← REASSEMBLY (Oct 2006 – May 2009)INSTALLATION (Oct 2006 – May 2009) →