REMOVAL
Removal / installation · Vehicles built from Jun 2006
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT SEAT HEADREST ASSEMBLY |
| 3. REMOVE OUTER SEAT TRACK BRACKET COVER |
Move the front passenger's seat assembly fully forward by operating the slide handle.

Using a screwdriver, disengage the 4 claws and remove the outer seat track bracket cover.
- HINT:
- Tape the screwdriver tip before use.
| 4. REMOVE INNER SEAT TRACK BRACKET COVER |
Using a screwdriver, disengage the 4 claws and remove the inner seat track bracket cover.

- HINT:
- Tape the screwdriver tip before use.
| 5. REMOVE FRONT SEAT ASSEMBLY |
Move the front passenger's seat assembly to the rearmost position by operating the slide handle.
Remove the 2 bolts on the front seat track bracket.

Move the front passenger's seat assembly fully forward by operating the slide handle.
Remove the 2 bolts on the rear seat track bracket.

Move the front passenger's seat assembly to the center position and adjust the seatback to the vertical position by operating the slide and reclining adjuster release handle.
Disconnect the connectors and clamp.
Remove the front passenger's seat assembly.
| 6. REMOVE RECLINING ADJUSTER RELEASE HANDLE |
Lift the reclining adjuster release handle.

Using a screwdriver, disengage the claw and remove the reclining adjuster release handle.
- HINT:
- Tape the screwdriver tip before use.
| 7. REMOVE FRONT SEAT CUSHION SHIELD |
Disengage the 2 hooks.

Remove the 2 screws.

Disengage the 3 claws and remove the front seat cushion shield.
| 8. REMOVE FRONT INNER SEAT CUSHION SHIELD |
Remove the screw.

Disengage the 3 claws and then remove the front inner seat cushion shield.
| 9. REMOVE FRONT SEAT INNER BELT ASSEMBLY |
Disconnect the connectors and disengage the 2 clamps.

Remove the nut and front seat inner belt assembly.

| 10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD |
Disengage the hooks and remove the separate type front seat cushion cover with pad.

| 11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD |
Remove the 16 hog rings and separate type front seat cushion pad from the separate type front seat cushion cover.

