REMOVAL
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
- HINT:
- Use the same procedure for the LH side and RH side.
- The procedures listed below are for the LH side.
- Use the same procedure for the LH side and RH side.
| 1. REMOVE FRONT WHEEL |
| 2. DRAIN BRAKE FLUID |
| 3. REMOVE FRONT BRAKE FLEXIBLE HOSE |
Using SST, disconnect the brake line while holding the front brake flexible hose with a wrench.

- SST
- 09023-00101
- NOTICE:
- Do not bend or damage the brake line.
- Do not allow any foreign matter such as dirt and dust to enter the brake line from the connecting points.
- Do not bend or damage the brake line.
Remove the clip.
Remove the bolt, and separate the front brake flexible hose and the speed sensor from the shock absorber.
Remove the union bolt, the front brake flexible hose and 2 gaskets.
