2006-2011 Camry Aurion · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009

HINT:
  1. Use the same procedure for the LH side and RH side.
  2. The procedures listed below are for the LH side.


1. REMOVE REAR WHEEL

2. DRAIN BRAKE FLUID

3. REMOVE REAR BRAKE FLEXIBLE HOSE

  1. C143454
    Remove the union bolt, the rear brake flexible hose and 2 gaskets.

  1. C132791E06
    Remove the bolt and separate the rear brake flexible hose.

  1. C133343E07
    Using SST, disconnect the brake line while holding the rear brake flexible hose with a wrench.
    SST
    09023-00101  

    NOTICE:
    1. Do not bend or damage the brake line.
    2. Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting points.

  1. Remove the clip.

← REMOVAL (Jun 2006 – May 2009)INSTALLATION (Jun 2006 – Sep 2006) →