2006-2011 Camry Aurion · Service Manual RESTRAINTS

INSTALLATION

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD

  1. B136593E01
    Using hog ring pliers, install the separate type front seat cushion pad to the separate type front seat cushion cover with 14 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.


2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

  1. B153023E01
    Engage the hooks.

  1. B153022
    Engage the 4 hooks.

  1. Connect the connector.


3. INSTALL FRONT POWER SEAT SWITCH

  1. B153027
    Install the front power seat switch with the 3 screws.

  1. Connect the connector.


4. INSTALL FRONT SEAT INNER BELT ASSEMBLY

  1. B147690E01
    Install the front seat inner belt assembly with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

  1. B153033E01
    Connect the connectors and engage the 2 clamps.


5. INSTALL FRONT INNER SEAT CUSHION SHIELD

  1. B153021
    Engage the 3 claws.

  1. Install the front inner seat cushion shield with the screw.


6. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY

  1. B153024
    Connect the connector.

  1. Engage the 2 claws.

  1. Install the front seat cushion shield assembly with the 5 screws.

  1. B147624
    Install the 2 rubber bands on the backside of the front seatback board sub-assembly.


7. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

  1. B153032
    Install the slide and vertical power seat switch knob.


8. INSTALL RECLINING POWER SEAT SWITCH KNOB

  1. B153031
    Install the reclining power seat switch knob.


9. INSTALL FRONT SEAT ASSEMBLY
  1. Place the seat in the cabin.

  1. Connect the connectors under the seat.

  1. Connect the cable to the negative (-) battery terminal.

  1. Move the front passenger's seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.

  1. B153030
    Temporarily install the front side of the front passenger's seat assembly with the 2 bolts.

  1. Move the front passenger's seat assembly fully forward by operating the slide and vertical power seat switch knob.

  1. B153020
    Temporarily install the rear side of the front passenger's seat assembly with the 2 bolts.

  1. Move the front passenger's seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.

  1. Fully tighten the 2 bolts on the front side of the front passenger's seat assembly in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Move the front passenger's seat assembly fully forward by operating the slide and vertical power seat switch knob.

  1. Fully tighten the 2 bolts on the rear side of the front passenger's seat assembly in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }


10. INSTALL OUTER SEAT TRACK BRACKET COVER

  1. B147713
    Engage the 4 claws and install the outer seat track bracket cover.


11. INSTALL INNER SEAT TRACK BRACKET COVER
  1. Engage the 4 claws and install the inner seat track bracket cover.


12. INSTALL FRONT SEAT HEADREST ASSEMBLY

13. INSPECT SRS WARNING LIGHT (w/ Front Seat Side Airbag)
(Click here)

14. INSPECT FRONT SEAT ASSEMBLY
  1. Inspect the power seat operation.

← INSTALLATION (Oct 2006 – May 2009)PRECAUTION (from Oct 2006) →