2006-2011 Camry Aurion · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE FRONT SEAT HEADREST ASSEMBLY

2. REMOVE OUTER SEAT TRACK BRACKET COVER
  1. Move the front passenger's seat assembly fully forward by operating the slide and vertical power seat switch knob.

  1. B147681
    Using a screwdriver, disengage the 4 claws and remove the outer seat track bracket cover.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE INNER SEAT TRACK BRACKET COVER
  1. Using a screwdriver, disengage the 4 claws and remove the inner seat track bracket cover.

    HINT:
    Tape the screwdriver tip before use.


4. REMOVE FRONT SEAT ASSEMBLY
  1. Operate the power seat switch knob and move the seat to the rearmost position.

  1. B153030
    Remove the 2 bolts on the front seat track bracket.

  1. Operate the power seat switch knob and move the seat fully forward.

  1. B153020
    Remove the 2 bolts on the rear seat track bracket.

  1. Disconnect the cable from the negative (-) battery terminal.

    CAUTION:
    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent the airbag and seat belt pretensioner from deploying (Click here).

  1. Disconnect the connectors under the seat. Then remove the front passenger's seat assembly.


5. REMOVE RECLINING POWER SEAT SWITCH KNOB

  1. B153025E01
    Using a screwdriver, remove the reclining power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.


6. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

  1. B153026E01
    Using a screwdriver, remove the slide and vertical power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.


7. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY

  1. B147624
    Disengage the 2 hooks.

  1. B153024
    Remove the 5 screws.

  1. Disengage the 2 claws and separate the front seat cushion shield assembly.

  1. Disconnect the connector from the front power seat lumbar switch.


8. REMOVE FRONT INNER SEAT CUSHION SHIELD

  1. B153021
    Remove the screw.

  1. Disengage the 3 claws and remove the front inner seat cushion shield.


9. REMOVE FRONT SEAT INNER BELT ASSEMBLY

  1. B153033E01
    Disconnect the connectors and disengage the 2 clamps.

  1. B147689
    Remove the nut and front seat inner belt assembly.


10. REMOVE FRONT POWER SEAT SWITCH

  1. B153027
    Remove the 3 screws.

  1. Disconnect the connector and remove the front power seat switch.


11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

  1. B153022
    Disconnect the connector.

  1. Disengage the 4 hooks.

  1. B153023E01
    Using a screwdriver, disengage the hooks and remove the separate type front seat cushion cover with pad.


12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD

  1. B134681E01
    Remove the 14 hog rings and separate type front seat cushion pad from the separate type front seat cushion cover.

← REMOVAL (Oct 2006 – May 2009)INSPECTION (from Oct 2006) →