SERVICE DATA
Specifications · Vehicles built from Oct 2006
| Throttle body |
||
| Standard throttle valve opening percentage |
60% or more |
|
| Camshaft timing oil control valve assembly |
||
| Resistance |
at 20°C (68°F) |
6.9 to 7.9 Ω |
| Crankshaft position sensor |
||
| -10 to 50 °C (14 to 122 °F) |
1,630 to 2,740 Ω |
|
| 50 to 100 °C (122 to 212 °F) |
2,065 to 3,225 Ω |
|
| Throttle body |
||
| Resistance |
at 20°C (68°F) |
|
| 2 (M+) - 1 (M-) |
0.3 to 100 kΩ |
|
| 5 (VC) - 3 (E2) |
1.2 to 3.2 kΩ |
|
| E.F.I. engine coolant temperature sensor |
||
| Resistance |
Approx. 20°C (68°F) |
2.32 to 2.59 kΩ |
| Approx. 80°C (176°F) |
0.310 to 0.326 kΩ |
|
| Knock sensor |
||
| Resistance |
at 20°C (68°F) |
120 to 280 kΩ |
| Circuit opening relay (engine room R/B Unit D) |
||
| Specified condition |
1E-8 - 1E-12 |
Below 1 Ω |
| 1E-7 - 1E-13 |
10 kΩ or higher |
|
| 1E-7 - 1E-13 |
Below 1 Ω (when battery voltage is applied to terminals 1G-5 and 1H-9) |
|
| EFI relay (engine room R/B Unit D) |
||
| Specified condition |
1E-9 - 1E-10 |
Below 1 Ω |
| 1E-7 - 1E-12 |
10 kΩ or higher |
|
| 1E-7 - 1E-12 |
Below 1 Ω (when battery voltage is applied to terminals 1H-10 and 1H-2) |
|
| A/F relay (engine room R/B Unit D) |
||
| Specified condition |
1E-7 - 1E-10 |
Below 1 Ω |
| 1A-3 - 1A-4 |
10 kΩ or higher |
|
| 1A-3 - 1A-4 |
Below 1 Ω (when battery voltage is applied to terminals 1D-5 and 1H-2) |
|
| IG2 Relay |
||
| Standard resistance |
3 - 5 |
10 kΩ or higher |
| 3 - 5 |
Below 1 Ω (Battery voltage applied between terminals 1 and 2) |
|
| Acceleration pedal rod |
||
| Standard voltage (ACCEL POS #1) |
Released |
0.5 to 1.1 V |
| Depressed |
2.5 to 4.5 V |
|
| Standard voltage (ACCEL POS #2) |
Released |
1.2 to 2.0 V |
| Depressed |
3.4 to 5.0 V |
|