2006-2011 Camry Aurion · Service Manual BRAKE

REASSEMBLY

Removal / installation · Vehicles built from Jun 2006


1. INSTALL VACUUM CHECK VALVE ASSEMBLY
  1. Install the vacuum check valve assembly and grommet to the brake booster assembly.


2. INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS
  1. Temporarily install the lock nut and the brake master cylinder push rod clevis to the booster assembly.

    NOTICE:
    Fully tighten the lock nut after adjusting the pedal height. (Click here)

← INSPECTION (from Jun 2006)INSTALLATION (Jun 2006 – Sep 2006) →