SERVICE DATA
Specifications · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
| Starter assembly |
Rated voltage and output power |
12 V 1.6 kW |
|
| Specified current |
90 A or less at 11.5 V |
||
| Starter armature assembly |
Standard depth |
3.1 mm (0.122 in.) |
|
| Minimum depth |
3.8 mm (0.149 in.) |
||
| Brush length |
Standard length |
9.0 mm (0.354 in.) |
|
| Minimum length |
4.0 mm (0.158 in.) |
||
| Starter relay |
Specified condition |
1 - 2 |
Below 1 Ω |
| 3 - 5 |
10 kΩ or higher |
||
| Starter cut relay |
Specified condition |
1 - 2 |
Below 1 Ω |
| 3 - 5 |
10 kΩ or higher |
||
| Ignition relay |
Specified condition |
1 - 2 |
Below 1 Ω |
| 3 - 5 |
10 kΩ or higher |
||
| Engine switch |
Standard resistance |
Pushed: 7 (SS1) - 5 (GND) |
Below 1 Ω |
| Pushed: 2 (SS2) - 5 (GND) | |||
| Not pushed: 7 (SS1) - 5 (GND) |
10 kΩ or higher |
||
| Not pushed: 2 (SS2) - 5 (GND) | |||
| Ignition switch |
Resistance |
LOCK: Between all terminals |
10 kΩ or higher |
| ACC: 2 (ACC) - 4 (AM1) |
Below 1 Ω |
||
| ON: 1 (IG1) - 2 (ACC) - 4 (AM1) | |||
| ON: 5 (AM2) - 6 (IG2) | |||
| START: 1 (ST1) - 3 (ST1) - 4 (AM1) | |||
| START: 5 (AM2) - 6 (IG2) - 7 (ST2) | |||