2006-2011 Camry Aurion · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from Oct 2006

Versions by build date: Jun 2006 – Sep 2006 from Oct 2006

POWER STEERING FLUID 
Fluid level rise (Maximum)
5 mm (0.20 in.)
Fluid pressure at idle speed with valve closed
7,800 to 8,300 kPa (79.5 to 84.6 kgf/cm2, 1,131 to 1,204 psi)
Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position
7,800 to 8,300 kPa (79.5 to 84.6 kgf/cm2, 1,131 to 1,204 psi)
STEERING WHEEL 
Steering effort at idle speed (Reference)
6.5 N*m (66 kgf*cm, 58 in.*lbf)
VANE PUMP (for 2AZ-FE) 
Vane pump shaft and vane pump housing oil clearance (Maximum)
0.07 mm (0.0028 in.)
Vane plate thickness (Standard)
1.405 to 1.411 mm (0.05531 to 0.05555 in.)
Clearance between the vane pump rotor groove and vane pump plate (Maximum)
0.03 mm (0.0012 in.)
Compression spring free length (Minimum)
29.2 mm (1.150 in.)
Vane pump rotating torque
0.27 N*m (2.8 kgf*cm, 2.4 in.*lbf) or less
VANE PUMP (for 2GR-FE) 
Vane pump shaft and vane pump housing oil clearance (Maximum)
0.07 mm (0.0028 in.)
Vane plate thickness (Standard)
1.405 to 1.411 mm (0.05531 to 0.05555 in.)
Clearance between the vane pump rotor groove and vane pump plate (Maximum)
0.03 mm (0.0012 in.)
Compression spring free length (Minimum)
29.2 mm (1.150 in.)
Vane pump rotating torque
0.27 N*m (2.8 kgf*cm, 2.4 in.*lbf) or less
POWER STEERING LINK 
Steering rack runout (Maximum)
0.3 mm (0.0118 in.)
Tie rod end sub-assembly stud bolt turning torque
0.98 to 3.92 N*m (10 to 40 kgf*cm, 8.7 to 34.7 in.*lbf)
Total preload (Control valve rotating torque)
1.6 N*m (16 kgf*cm, 14 in.*lbf) or less
← SERVICE DATA (Jun 2006 – Sep 2006)TORQUE SPECIFICATIONS (Jun 2006 – Sep 2006) →