ON-VEHICLE INSPECTION
Inspection · Vehicles built from Oct 2006
| INSPECT IGNITION OR STARTER SWITCH ASSEMBLY |
Check the resistance.

Using an ohmmeter, measure the resistance between the terminals.
- Standard resistance:
Condition
Tester Connection
Specified Condition
LOCK
Between all terminals
10 kΩ or higher
ACC
2 - 4
Below 1 Ω
ON
1 - 2 - 4
Below 1 Ω
5 - 6
Below 1 Ω
START
1 - 3 - 4
Below 1 Ω
5 - 6 - 7
Below 1 Ω
