2006-2011 Camry Aurion · Service Manual COMMUNICATION SYSTEM

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

HINT:
  1. Use these procedures to troubleshoot the LIN communication system.
  2. The intelligent tester should be used in steps 4, 5 and 6.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.CUSTOMER PROBLEM ANALYSIS

      HINT:
      1. In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
      2. Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
      3. The following 5 items are important points in the problem analysis:
      What
      Vehicle model, system name
      When
      Date, time, occurrence frequency
      Where
      Road conditions
      Under what conditions?
      Driving conditions, weather conditions
      How did it happen?
      Problem symptoms

    NEXT

    3.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      HINT:
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT

    4.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
    1. Using the intelligent tester, inspect the CAN communication function to ensure there are no malfunctions in the communication system.

      Result:
      Result
      Proceed to
      No DTCs output
      A
      DTCs output
      (for LHD with Smart Entry and Start System)
      B
      DTCs output
      (for LHD without Smart Entry and Start System)
      C
      DTCs output
      (for RHD with Smart Entry and Start System)
      D
      DTCs output
      (for RHD without Smart Entry and Start System)
      E


    B.

    C.

    D.

    E.
    A

    5.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
    1. Using the intelligent tester , inspect the LIN communication function to ensure there are no malfunctions in the communication system (Click here).

      Result:
      Result
      Proceed to
      No DTCs output (LIN communication error does not occur.)
      A
      DTCs output
      B


    B.
    A

    6.OVERALL ANALYSIS AND TROUBLESHOOTING*
    1. DATA LIST/ACTIVE TEST (Click here)

    2. TERMINALS OF ECU (Click here)

    NEXT

    7.ADJUST, REPAIR OR REPLACE
      NEXT

      8.CONFIRMATION TEST
        NEXT

        ← HOW TO PROCEED WITH TROUBLESHOOTING (Jun 2006 – Sep 2006)HOW TO PROCEED WITH TROUBLESHOOTING (from Jun 2009) →