2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REGISTRATION

Other · Vehicles built from Oct 2006


1. MAYDAY ECU REGISTRATION
If a new mayday ECU has been installed into the vehicle, it must be registered with Toyota Link.
  1. Turn the engine switch on (IG).

  1. Make a call to Toyota Link by pressing the Toyota Link button.

  1. When the Toyota Link operator answers, inform the operator:

    1. who you are,
    2. what dealer you are from, and
    3. that you have installed a new mayday ECU into the vehicle.

  1. You will be required to provide the operator with:

    1. the vehicle identification number (VIN), and
    2. the vehicle registration number, if it is registered.

  1. Toyota Link will then call you back to verify that you are from a dealer.

  1. Toyota Link will then perform a device swap.

  1. The new mayday ECU is now registered to this vehicle.

← OPERATION CHECK (from Oct 2006)TERMINALS OF ECU (from Oct 2006) →