TL22 Diagnostic Power Short Too Battery
Diagnostic trouble codes · Vehicles built from Oct 2006
DESCRIPTION
Supply voltage is applied to the mayday ECU diagnostic connector at all times via terminal 3.INSPECTION PROCEDURE
| 1. CHECK DTCs |
 |
Turn the engine switch on (IG).
Select: Diagnosis / DTC List / Current DTC / Clear Current DTCs.
Select: Back / History DTC / Clear Current DTCs.
Does DTC TL22 reappear?
|
NO |
 |
|
| CHECK CHARGING SYSTEM FOR AN INTERMITTENT FAULT (Click here)
|
|
|
| YES |
|
 |
|
| 2. CHECK MAYDAY ECU WIRE HARNESS |
 |
- Disconnect the mayday ECU connectors A and B.
Check for continuity between the mayday ECU unit connector N46 and connectors A and B.
- OK:
- Less than 1 Ω
|
NG |
 |
|
| REPAIR OR REPLACE MAYDAY ECU WIRE HARNESS |
|
|
| OK |
|
 |
|
| 3. CHECK MAYDAY ECU CONNECTORS |
 |
Are the mayday ECU connectors tight?
|
NO |
 |
|
| REPAIR OR REPLACE THE CONNECTORS |
|
|
| YES |
|
 |
|
|