USB Device or "iPod" cannot Charge
Circuit diagnosis · Vehicles built from Jun 2009
INSPECTION PROCEDURE
| 1. REPLACE USB DEVICE OR "iPod" |
Disconnect the USB device or "iPod" from the radio and display assembly.
Turn the ignition switch off.
- HINT:
- When this malfunction occurs, it is necessary to turn off the ignition switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the ignition switch on (ACC).
Connect a known good USB device or "iPod" to the radio and display assembly.
- OK:
- USB device or "iPod" charges.
|
|
||||
| OK | ||
| ||
