2006-2011 Camry Aurion · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built Jun 2006 – May 2009

HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.


1. REMOVE REAR WHEEL

2. DRAIN BRAKE FLUID

NOTICE:
If brake fluid leaks onto any painted surface, wash or remove it completely.


3. DISCONNECT REAR BRAKE FLEXIBLE HOSE

  1. C132824
    Remove the union bolt and the 2 gaskets from the rear disc brake cylinder assembly, then disconnect the rear flexible hose.


4. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY

  1. C132823E01
    Hold the 2 rear disc brake cylinder slide pins and remove the 2 bolts and rear disc brake cylinder assembly.

← COMPONENTS (Jun 2006 – May 2009)DISASSEMBLY (Jun 2006 – May 2009) →