REMOVAL
Removal / installation · Vehicles built from Jun 2009
- HINT:
- Use the same procedure for the LH side and RH side.
- The procedures listed below are for the LH side.
| 2.
DRAIN BRAKE FLUID |
 |
- NOTICE:
- If brake fluid leaks onto any painted surface, wash or remove it completely.
| 3.
DISCONNECT REAR BRAKE FLEXIBLE HOSE |
 |
- Remove the union bolt and 2 gaskets from the rear disc brake cylinder assembly, then disconnect the rear flexible hose.
| 4.
REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY |
 |
- Hold the 2 rear disc brake cylinder slide pins and remove the 2 bolts and rear disc brake cylinder assembly.