2006-2011 Camry Aurion · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


1. INSTALL REAR BUMPER ASSEMBLY (w/o Rear Lower Spoiler)

  1. B137214
    Engage each claw.

  1. Install the rear bumper assembly with the 6 screws and 2 clips.

  1. B137213
    Install the 2 rear bumper plates.

  1. w/ Clearance Sonar System:

    1. B149446
      Install the grommet

    2. Connect the connector.


2. INSTALL REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY LH (w/o Rear Lower Spoiler)

  1. B137209
    Install the rear quarter panel mudguard sub-assembly LH with the 3 screws.


3. INSTALL REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY RH (w/o Rear Lower Spoiler)

HINT:
Use the same procedure for the RH side and LH side.


4. INSTALL REAR BUMPER ASSEMBLY (w/ Rear Lower Spoiler)

  1. B140154
    Engage each claw.

  1. Install the rear bumper assembly with the 6 screws.

  1. B147905
    Install the 2 rear bumper plates.

  1. w/ Clearance Sonar System:

    1. B149446
      Install the grommet

    2. Connect the connector.


5. INSTALL REAR FLOOR BOARD (w/ Rear Lower Spoiler)

  1. B138885E01
    Install the rear floor board with the 3 nuts, 2 clips and 4 screws.


6. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Clearance Sonar System)

  1. B136855
    Install the luggage compartment inner trim cover RH with the 2 clips.


7. INSTALL REAR FLOOR FINISH PLATE (w/ Clearance Sonar System)

  1. B136852
    Engage the 7 clips and install the rear floor finish plate.


8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (w/ Clearance Sonar System)

  1. B136879
    Install the 2 No. 1 luggage compartment trim hooks with the 2 screws.


9. INSTALL SPARE WHEEL COVER ASSEMBLY (w/ Clearance Sonar System)

10. INSTALL SPARE WHEEL COVER CLAMP (w/ Clearance Sonar System)

11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (w/ Clearance Sonar System)
← INSTALLATION (Jun 2006 – May 2009)COMPONENTS (from Oct 2006) →