REASSEMBLY
Removal / installation · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL FRONT BUMPER SIDE RETAINER LH |
 |
- Engage the claw and install the front bumper side retainer LH.
Install the screw.
| 2.
INSTALL FRONT BUMPER SIDE RETAINER RH |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 3.
INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
 |
- Install the front bumper reinforcement sub-assembly with the 6 bolts.
-
Torque:
- 34 N*m{
347 kgf*cm
, 25 ft.*lbf
}
Engage each clamp.
| 4.
INSTALL FRONT BUMPER ENERGY ABSORBER |
 |
- Install the front bumper energy absorber to the front bumper reinforcement sub-assembly.
| 5.
INSTALL RADIATOR GRILLE EMBLEM |
 |
- Engage the 4 claws and install the radiator grille emblem.
| 6.
INSTALL FRONT BUMPER UPPER RETAINER |
 |
- Install the front bumper upper retainer with the 3 clips.
| 7.
INSTALL HOOD TO FRONT END PANEL SEAL |
 |
- Apply new double-sided tape to the hood to front end panel seal.
Remove the release paper from the hood to front end panel seal.
Install the hood to front end panel seal with the 10 clips.
| 8.
INSTALL RADIATOR GRILLE |
 |
- Engage the 16 claws and install the radiator grille.
Install the 2 screws.
| 9.
INSTALL LOWER RADIATOR GRILLE |
 |
- Engage the 14 claws and install the lower radiator grille.
| 10.
INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light) |
 |
- Engage the 5 claws and install the front bumper hole cover LH.
| 11.
INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light) |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 12.
INSTALL FRONT BUMPER HOLE COVER LH (w/ Fog Light) |
 |
- Engage the 5 claws and install the front bumper hole cover LH.
| 13.
INSTALL FRONT BUMPER HOLE COVER RH (w/ Fog Light) |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 14.
INSTALL FRONT BUMPER LOWER COVER |
 |
- Engage the 2 claws and install the front bumper lower cover.
| 15.
INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET |
 |
- Engage the 2 claws and install the front bumper extension mounting bracket.
Install the 2 screws.
| 16.
INSTALL FRONT BUMPER EXTENSION LH (w/ Front Spoiler) |
 |
- Install the front bumper extension LH with the 2 nuts.
| 17.
INSTALL FRONT BUMPER EXTENSION RH (w/ Front Spoiler) |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 18.
INSTALL FRONT SPOILER COVER |
 |
Engage the 17 claws and install the front spoiler cover.


Install the 25 clips and 2 screws.
| 19.
INSTALL FOG LIGHT ASSEMBLY LH
|
 |
- Install the fog light assembly with the screw.
| 20.
INSTALL FOG LIGHT ASSEMBLY RH |
 |
- HINT:
- Use the same procedure for the RH side and LH side.