INSTALLATION
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
| 1. INSTALL REAR SPOILER |
- HINT:
- When installing the spoiler, heat the vehicle body and spoiler using a heat light.
- Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Spoiler
20 to 30°C (68 to 86°F)
- NOTICE:
- Do not heat the vehicle body and rear spoiler excessively.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the rear spoiler. (If reusing the rear spoiler)
Using a heat light, heat the rear spoiler.
Remove the double-sided tape from the rear spoiler.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the rear spoiler.


Install the rear spoiler.

Using a heat light, heat the vehicle body and rear spoiler.
Remove the release paper from the rear spoiler.
- HINT:
- After removing the release paper, keep the exposed adhesive free from foreign matter.
Engage the 4 clips and install the rear spoiler with the 2 nuts.
| 2. INSTALL LUGGAGE COMPARTMENT DOOR COVER |
Install the luggage compartment door cover with the 13 clips.

