INSTALLATION
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL SPEED SENSOR (NC SENSOR) |
 |
Coat a new O-ring with ATF and install it to the speed sensor.
- Install the speed sensor with the bolt.
-
Torque:
- 11 N*m{
112 kgf*cm
, 8 ft.*lbf
}
Connect the speed sensor connector.
| 2.
INSTALL SPEED SENSOR (NT SENSOR) |
 |
Coat a new O-ring with ATF and install it to the speed sensor.
- Install the speed sensor with the bolt.
-
Torque:
- 11 N*m{
112 kgf*cm
, 8 ft.*lbf
}
Connect the speed sensor connector.
| 3.
INSTALL AIR CLEANER CASE SUB-ASSEMBLY
|
 |
- Install the air cleaner case with the 3 bolts.
-
Torque:
- 5.0 N*m{
51 kgf*cm
, 44 in.*lbf
}
Connect the hose clamp.
| 4.
INSTALL AIR CLEANER CAP SUB-ASSEMBLY
|
 |
Install the air cleaner filter element onto the air cleaner case.
- Insert the hinges. Install the air cleaner cap sub-assembly with the 2 bolts.
- Connect the No. 1 air cleaner hose to the throttle body and unfasten the No. 1 air cleaner hose clamp.
- NOTICE:
- Match each concave area concavity of the air cleaner hose with the bolt of the throttle body.
- Make sure that the hose clamp is at the correct angle.
- Connect the No. 2 ventilation hose to the air cleaner hose.
- Connect the purge line hose to the clamp (*1).
Connect the 2 purge VSV vacuum hoses (*2).
Connect the purge VSV connector (*3).
Connect the mass air flow meter connector (*4).
| 5.
INSTALL AIR CLEANER INLET ASSEMBLY
|
 |
- Install the air cleaner inlet with the 2 bolts.
-
Torque:
- 5.0 N*m{
51 kgf*cm
, 44 in.*lbf
}
| 6.
INSTALL BATTERY
|
 |
Install the battery and battery tray.
- Install the battery clamp with the bolt and nut.
-
Torque:
- Bolt:
- 9.0 N*m{
92 kgf*cm
, 80 in.*lbf
}
- Nut:
- 3.5 N*m{
36 kgf*cm
, 31 in.*lbf
}
| 7.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
|
 |
-
Torque:
- 6.9 N*m{
70 kgf*cm
, 61 in.*lbf
}