2006-2011 Camry Aurion · Service Manual ENGINE

BASIC INSPECTION

Troubleshooting · Vehicles built from Jun 2006

When the malfunction is not confirmed by the DTC check, troubleshooting should be carried out in all circuits considered to be possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following flowchart, the location of the problem can be found quickly and efficiently. Therefore, using this check is essential when engine troubleshooting.

1.CHECK BATTERY VOLTAGE

    NOTICE:
    Conduct this check with the engine stopped and the ignition switch off.

    Result:
    Result
    Proceed to
    11 V or more
    OK
    Below 11 V
    NG


NG.
OK

2.CHECK IF ENGINE CRANKS

    NG.
    OK

    3.CHECK IF ENGINE STARTS

      NG.
      OK

      4.CHECK AIR FILTER
      1. Visually check that the air filter is not excessively contaminated with dirt or oil.


      NG.
      OK

      5.CHECK IDLING SPEED

        NG.
        OK

        6.CHECK FUEL PRESSURE

          NG.
          OK

          7.CHECK FOR SPARK

            NG.
            OK

            ← CHECK FOR INTERMITTENT PROBLEMS (from Jun 2009)PROBLEM SYMPTOMS TABLE (Jun 2006 – Sep 2006) →