CHECK FOR INTERMITTENT PROBLEMS
Troubleshooting · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
- HINT:
- Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with the intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1-trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2-trip detection logic.
- Clear the DTCs (Click here).
- Switch the ECM from normal mode to check mode using the intelligent tester (Click here).
- Perform a simulation test.
- Check and wiggle the harness(es), connector(s) and terminal(s).
- Clear the DTCs (Click here).