DTC CHECK / CLEAR
Troubleshooting · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| DTC CHECK |
Connect the intelligent tester to the DLC3.

Turn the ignition switch to the ON position.
Read the DTCs by following the prompts on the tester screen.
- HINT:
- Refer to the intelligent tester operator's manual for further details.
| DTC CLEAR |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
Operate the intelligent tester to erase the codes.
- HINT:
- Refer to the intelligent tester operator's manual for further details.