2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

Touch Panel Switch does not Function

Circuit diagnosis · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

INSPECTION PROCEDURE


1. CHECK MULTI-DISPLAY
  1. Check if there is any foreign matter caught between the display and exterior frame of the multi-display.

    OK:
    No foreign matter is caught between the display and exterior frame of the multi-display.

    HINT:
    If there is foreign matter between the display and exterior frame of the multi-display, the touch panel will remain pressed, preventing touch switch operation.



NG
REMOVE FOREIGN MATTER
OK


2. CHECK TOUCH PANEL
  1. Check for foreign matter on the display.

    OK:
    The display is clean.



NG
CLEAN DISPLAY AND RECHECK TOUCH PANEL
OK


3. CHECK TOUCH SWITCH (DISPLAY CHECK MODE)
I100039E04
  1. Enter the "Display Check" mode (Touch Switch Check) (Click here).

  1. Touch the display in the area where the switch malfunction occurs.

    OK:
    A "+" mark appears at the touched position.



NG
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY


← Panel Switches do not Function (from Jun 2009)Touch Panel Switch does not Function (Oct 2006 – May 2009) →