Voice Guidance does not Function
Circuit diagnosis · Vehicles built Jun 2006 – May 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
INSPECTION PROCEDURE
| 1. CHECK NAVIGATION SETTING |
 |
- Enter the "Menu" screen by pressing the "MENU" switch.
Select "Volume".
- Check that "OFF" is not selected.
- OK:
- "OFF" is not selected.
|
NG |
 |
|
| TURN VOICE GUIDANCE VOLUME UP TO 4 USING VOICE ADJUSTMENT SWITCHES |
|
|
| OK |
|
 |
|
| 2. CHECK NAVIGATION SETTING |
 |
- Enter the "Menu" screen by pressing the "MENU" switch.
Select "Setup".
- Check that "Voice Guidance in All Modes" is not OFF.
- OK:
- Voice guidance in all modes is not OFF.
|
NG |
 |
|
| TURN VOICE GUIDANCE IN ALL MODES "ON" |
|
|
| OK |
|
 |
|
| 3. CHECK NAVIGATION SETTING |
 |
- Enter the "Menu" screen by pressing the "MENU" switch.
Select "Setup".
- Check that "Auto Voice Guidance" is not OFF.
- OK:
- Auto voice guidance is not OFF.
|
NG |
 |
|
| TURN AUTO VOICE GUIDANCE "ON" |
|
|
| OK |
|
 |
|
| 4. CHECK MAP DISC |
 |
- Check that the map disc is not deformed or cracked.
- OK:
- No deformations or cracks on the map disc.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 5. CHECK NAVIGATION RECEIVER ASSEMBLY |
 |
Check that audio sound can be heard from the driver side speaker.
- OK:
- Audio sound can be heard.
|
NG |
 |
|
| PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE |
|
|
| OK |
|
 |
|
| REPLACE NAVIGATION RECEIVER ASSEMBLY |
|