Current Position Display does not Appear
Circuit diagnosis · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
INSPECTION PROCEDURE
| 1. CHECK NAVIGATION RECEIVER ASSEMBLY |
 |
Enter the map data information screen.
- Check if a map disc is inserted into the map disc slot.
Check if the map data version is displayed.
- OK:
- The map data version is displayed.
|
NG |
 |
|
| INSERT MAP DISC IN MAP DISC SLOT |
|
|
| OK |
|
 |
|
| 2. CHECK MAP DISC |
 |
- Check that the map disc is not deformed or cracked.
- OK:
- No deformations or cracks on the map disc
|
NG |
 |
|
|
|
| OK |
|
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|