B1442/42 Air Inlet Damper Control Servo Motor Circuit
Diagnostic trouble codes · Vehicles built from Oct 2006
Versions by build date: Jun 2006 – Sep 2006 from Oct 2006
DESCRIPTION
The damper servo (air inlet control) sends pulse signals to inform the air conditioning amplifier of the damper position. The air conditioning amplifier activates the motor (normal, reverse) based on the signals to move the air inlet damper to any position, which controls the intake air settings (FRESH, FRESH/RECIRCULATION, and RECIRCULATION).- HINT:
- Confirm that no mechanical problem is present because this diagnostic code can be output when either a damper link or damper is mechanically locked.
| DTC No. |
DTC Detection Condition |
Trouble Area |
| B1442/42 |
Air inlet damper position sensor value does not change even if air conditioning amplifier operates air inlet control servo motor |
|
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. READ VALUE USING INTELLIGENT TESTER |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the intelligent tester main switch on.
Operate the R/F (Recirculation/Fresh) switch.
Select the item below in the Data List, and read the display on the intelligent tester.
| Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
| Air Inlet Damper Targ Pulse (A/I Damp Targ Pls) |
Air inlet damper target pulse / Min.: 0, Max.: 255 |
RECIRCULATION: 7 (pulse) FRESH: 28 (pulse) |
- |
- OK:
- The display is as specified in the normal condition column.
- Result:
Result
Proceed to
NG
A
OK (When troubleshooting according to the PROBLEM SYMPTOMS TABLE)
B
OK (When troubleshooting according to the DTC)
C
|
|
||||
|
|
||||
| A | |
| 2. REPLACE AIR INLET CONTROL SERVO MOTOR |
Replace the air inlet control servo motor.
- HINT:
- Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one and check that the condition returns to normal.
Check for DTCs.
- Result:
Result
Proceed to
DTC B1442/42 is output
A
DTC B1442/42 is not output
B
|
|
||||
| A | ||
| ||
