P0505 Idle Control System Malfunction
Diagnostic trouble codes · Vehicles built Jun 2006 – May 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
DESCRIPTION
The idling speed is controlled by the Electronic Throttle Control System (ETCS). The ETCS is comprised of: 1) the one valve type throttle body; 2) the throttle actuator, which operates the throttle valve; 3) the throttle position (TP) sensor, which detects the opening angle of the throttle valve; 4) the accelerator pedal position (APP) sensor, which detects the accelerator pedal position; and 5) the ECM, which controls the ETCS. Based on the target idling speed, the ECM controls the throttle actuator to provide the proper throttle valve opening angle.| DTC No. |
DTC Detection Condition |
Trouble Area |
| P0505 |
Idle speed continues to vary greatly from target speed (2-trip detection logic) |
|
INSPECTION PROCEDURE
- HINT:
- The following condition may also cause DTC P0505 to be set:
- The throttle valve is not fully closed. (e.g. The accelerator pedal is slightly depressed by something such as a floor carpet overlapping the accelerator pedal.)
- Read freeze frame data using the intelligent tester. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air-fuel ratio was lean or rich, and other data from the time the malfunction occurred.
- The following condition may also cause DTC P0505 to be set:
| 1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0505) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position and turn the tester on.
Select the following menu items: Powertrain / Engine and ECT / DTC.
Read the DTCs.
- Result:
Display (DTC output)
Proceed to
P0505
A
P0505 and other DTCs
B
- HINT:
- If any DTCs other than P0505 are output, troubleshoot those DTCs first.
|
|
||||
| A | |
| 2. CHECK VENTILATION HOSE CONNECTIONS |
- OK:
- Ventilation hose is connected correctly and is not damaged.
|
|
||||
| OK | |
| 3. CHECK AIR INDUCTION SYSTEM |
Check the air induction system for vacuum leakage.
- OK:
- No leakage from air induction system.
|
|
||||
| OK | |
| 4. CHECK THROTTLE VALVE |
Check the throttle valve condition.
- OK:
- Throttle valve is not contaminated with foreign objects and moves smoothly.
|
|
||||
| OK | ||
| ||
