INSPECTION
Inspection · Vehicles built from Jun 2006
| INSPECT SPEED SENSOR (NT SENSOR) |
 |
- Disconnect the speed sensor connector from the transaxle.
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection
|
Specified Condition (20°C (68°F))
|
1 - 2
|
560 to 680 Ω
|
If the resistance value is not as specified, replace the speed sensor.
| INSPECT SPEED SENSOR (NC SENSOR) |
 |
- Disconnect the speed sensor connector from the transaxle.
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection
|
Specified Condition (20°C (68°F))
|
1 - 2
|
560 to 680 Ω
|
If the resistance value is not as specified, replace the speed sensor.