DATA LIST / ACTIVE TEST
System information · Vehicles built from Oct 2006
Versions by build date: Jun 2006 – Sep 2006 from Oct 2006
| READ DATA LIST |
- HINT:
- Using the intelligent tester's Data List allows switch, sensor, actuator, and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Read the Data List according to the display on the tester.
SLIDE ROOF: Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
Open SW
(Open Switch)
Slide switch open signal/ON or OFF
ON: OPEN switch is pressed.
OFF: OPEN switch is not pressed.
-
Close SW
(Close Switch)
Slide switch close signal/ON or OFF
ON: CLOSE switch is pressed.
OFF: CLOSE switch is not pressed.
-
Up SW
(Up Switch)
Tilt switch up signal/ON or OFF
ON: UP switch is pressed.
OFF: UP switch is not pressed.
-
Down SW
(Down Switch)
Tilt switch down signal/ON or OFF
ON: DOWN switch is pressed.
OFF: DOWN switch is not pressed.
-
Hall IC1 Pulse
(Hall IC1 Pulse)
Sliding roof operation signal/LO or HI
LO: Sliding roof motor is not operating.
HI: Sliding roof motor is operating.
-
Hall IC1 Status
(Hall IC1 Status)
Sliding roof operation signal/NORMAL or LOCK
NORMAL: Sliding roof motor is operating.
LOCK: Sliding roof motor is not operating.
-
Hall IC2 Pulse
(Hall IC2 Pulse)
Sliding roof operation signal/LO or HI
LO: Sliding roof motor is not operating.
HI: Sliding roof motor is operating.
-
Hall IC2 Status
(Hall IC2 Status)
Sliding roof operation signal/NORMAL or LOCK
NORMAL: Sliding roof motor is operating.
LOCK: Sliding roof motor is not operating.
-
IG (Direct Sig)
(Ignition (Direct Signal))
Ignition switch signal/ON or OFF
ON: Ignition switch on (IG)
OFF: Ignition switch off
-
IG (MPX)
(Ignition (MPX))
Ignition switch signal (MPX signal)/ON or OFF
ON: Ignition switch on (IG)
OFF: Ignition switch off
-
D-Door Warn SW
(Door Courtesy)
Driver's door courtesy light switch signal/ON or OFF
ON: Driver's side door is open.
OFF: Driver's side door is closed.
-
Key Close Oprt
(Door Key Close Operation)
Door key-linked open operation signal/ON or OFF
ON: Driver's side door is kept closed for 1.5 sec. or more.
OFF: Driver's side door is not kept closed for 1.5 sec. or more.
-
Key Open Oprt
(Door Key Open Operation)
Door key-linked open operation signal/ON or OFF
ON: Driver's side door is open for 1.5 sec. or more.
OFF: Driver's side door is not open for 1.5 sec. or more.
-
Wirles Close Oprt
(Wireless Close Operation)
Wireless sliding roof close signal/ON or OFF
ON: Transmitter UNLOCK switch is not pressed.
OFF: Transmitter UNLOCK switch is pressed.
-
Wirles Opn Oprt
(Wireless Open Operation)
Wireless sliding roof open signal/ON or OFF
ON: Transmitter UNLOCK switch is pressed.
OFF: Transmitter UNLOCK switch is not pressed.
-
Key Off Perms
(Key Off Permission)
Key-OFF sliding roof operation permit signal (Current)/ON or OFF
ON: Driver's side door is not closed within 45 sec. after ignition switch is turned off.
OFF: Any status except "ON" status
-
Open/Door Key
(Door Key Related (Open))
Key-linked sliding roof open permit signal/Available or Not available
Available: Key-linked sliding roof open function on.
Not Available: Key-linked sliding roof open function off.
-
Close/Door Key
(Door Key Related (Close))
Key-linked sliding roof close permit signal/Available or Not available
Available: Key-linked sliding roof close function on.
Not Available: Key-linked sliding roof close function off.
-
Open/Wireless
(Wireless Key Rel (Open))
Wireless sliding roof open permit signal/Available or Not available
Available: Wireless transmitter-linked sliding roof open function on.
Not Available: Wireless transmitter-linked sliding roof open function off.
-
Close/Wireless
(Wireless Key Rel (Close))
Wireless sliding roof close permit signal/Available or Not available
Available: Wireless transmitter-linked sliding roof close function on.
Not Available: Wireless transmitter-linked sliding roof close function off.
-
Door Key Oper
(Door Key Related Operation)
Key-linked sliding roof operating direction signal/Tilt or Slide
TILT: Slide close direction → Tilt up direction
SLIDE: Slide open direction → Tilt down direction
-
Wireless Oper
(Wireless Key Rel Operation)
Wireless sliding roof operating direction signal/Tilt or Slide
TILT: Slide close direction → Tilt up direction
SLIDE: Slide open direction → Tilt down direction
-
Opn SW (P)
(Open Switch Failure (Past))
Open switch failure signal (Past)/Fail or Not Fail
Fail: Sliding roof open signal failure (Past)
Not Fail: Sliding roof open signal not fail (Past)
-
Cls SW (P)
(Close Switch Failure (Past))
Close switch failure signal (Past)/Fail or Not Fail
Fail: Sliding roof close signal failure (Past)
Not Fail: Sliding roof close signal not fail (Past)
-
Up SW (P)
(Up Switch Failure (Past))
Up switch failure signal (Past)/Fail or Not Fail
Fail: Sliding roof tilt up signal failure (Past)
Not Fail: Sliding roof tilt up signal not fail (Past)
-
Down SW (P)
(Down Switch Failure (Past))
Down switch failure signal (Past)/Fail or Not Fail
Fail: Sliding roof tilt down signal failure (Past)
Not Fail: Sliding roof tilt down signal not fail (Past)
-
Opn SW (C)
(Open Switch Failure (Current))
Open switch failure signal (Current)/Fail or Not Fail
Fail: Sliding roof open signal failure (Current)
Not Fail: Sliding roof open signal not fail (Current)
-
Cls SW (C)
(Close Switch Failure (Current))
Close switch failure signal (Current)/Fail or Not Fail
Fail: Sliding roof close signal failure (Current)
Not Fail: Sliding roof close signal not fail (Current)
-
Up SW (C)
(Up Switch Failure (Current))
Up switch failure signal (Current)/Fail or Not Fail
Fail: Sliding roof tilt up signal failure (Current)
Not Fail: Sliding roof tilt up signal not fail (Current)
-
Down SW (C)
(Down Switch Failure (Current))
Down switch failure signal (Current)/Fail or Not Fail
Fail: Sliding roof tilt down signal failure (Current)
Not Fail: Sliding roof tilt down signal not fail (Current)
-
| PERFORM ACTIVE TEST |
- HINT:
- Performing the intelligent tester's Active Test allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Perform the Active Test according to the display on the tester.
SLIDE ROOF: Tester Display
Test Part
Control Range
Diagnostic Note
Slide Roof
(Slide Roof)
Operate sliding roof SLIDE CLOSE/TILT UP
CLOS/UP: Sliding roof SLIDE CLOSE or TILT UP operation occurs.
OFF: Sliding roof is not operating
-
Slide Roof
(Slide Roof)
Operate sliding roof SLIDE OPEN/TILT DOWN
OPN/DWN: Sliding roof SLIDE OPEN or TILT DOWN operation occurs
OFF: Sliding roof is not operating
-