Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009from Jun 2009
1.
REMOVE FRONT SEAT HEADREST ASSEMBLY
2.
REMOVE OUTER SEAT TRACK BRACKET COVER
Operate the power seat switch knob and move the seat to the position farthest forward.
Using a screwdriver, detach the 4 claws and remove the outer seat track bracket cover.
HINT:
Tape the screwdriver tip before use.
3.
REMOVE INNER SEAT TRACK BRACKET COVER
Using a screwdriver, detach the 4 claws and remove the inner seat track bracket cover.
4.
REMOVE FRONT SEAT ASSEMBLY
Operate the power seat switch knob and move the seat to the rearmost position.
Remove the 2 bolts on the front seat track bracket.
Operate the power seat switch knob and move the seat to the position farthest forward.
Remove the 2 bolts on the rear seat track bracket.
Disconnect the cable from the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent the airbag and seat belt pretensioner from deploying (Click here).
Disconnect the connectors under the seat. Then remove the front seat assembly.