2006-2011 Camry Aurion · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009

CAUTION:
Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.


1. REMOVE RECLINING POWER SEAT SWITCH KNOB

  1. B149584E01
    Using a screwdriver, detach the reclining power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.


2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

  1. B149585E01
    Using a screwdriver, detach the slide and vertical power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY

  1. B146651
    Disconnect the 2 hooks.

  1. B149573
    Remove the 5 screws.

  1. Disengage the 2 claws and separate the front seat cushion assembly.

  1. Disconnect the connector from the front power seat lumbar switch.


4. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD

  1. B146653
    Remove the screw.

  1. Detach the 2 claws and remove the front inner No. 1 seat cushion shield.


5. REMOVE FRONT POWER SEAT LUMBAR SWITCH

  1. B146654
    Remove the 2 screws and front power seat lumbar switch.


6. REMOVE FRONT SEAT INNER BELT ASSEMBLY

  1. B147624
    for LHD:

    1. Disengage the 2 hooks.

    2. B151312E01
      Disconnect the connectors and disengage each clamp.

    3. Disconnect the connector. (for Driver Seat)

    4. Remove the nut and front seat inner belt assembly.

      B151321E01

  1. B152833
    for RHD Driver Seat:

    1. Disengage the 2 hooks.

    2. B151313E03
      Disconnect the connector and disengage the 3 clamps.

    3. B236439
      Disconnect the connector.

    4. Remove the nut and front seat inner belt assembly.

  1. for RHD Passenger Seat:

    1. Disengage the 2 hooks.

    2. Disconnect the connector and disengage the 3 clamps.

    3. B236437
      Remove the nut and front seat inner belt assembly.


7. REMOVE FRONT INNER SEAT CUSHION SHIELD

  1. B146655
    Remove the screw.

  1. Disengage the 3 claws and remove the front inner seat cushion shield.


8. REMOVE POWER SEAT SWITCH

  1. B149586
    Remove the 3 screws.

  1. Disconnect the connector and remove the front power seat switch.


9. REMOVE FRONT SEAT CUSHION ASSEMBLY

  1. B146657
    Disconnect the connector.

  1. Remove the 4 hooks.

  1. B146658E01
    Using a screwdriver, detach the hooks and remove the front seat cushion assembly.


10. REMOVE FRONT SEPARATE TYPE SEAT CUSHION COVER

  1. B134681E01
    Remove the 16 hog rings and front separate type seat cushion cover from the seat cushion pad.


11. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY

  1. B134682E01
    Remove the 2 screws.

  1. Disconnect the 14 clamps and front separate type seatback cover.

  1. Pull the seatback board in the direction indicated by the arrow in the illustration to detach the 2 claws. Then, remove the seatback board.


12. REMOVE FRONT SEAT HEADREST SUPPORT

  1. B134683
    Detach the 2 claws and remove the headrest support.

    HINT:
    Use the same procedure for the RH side and LH side.


13. REMOVE FRONT SEATBACK ASSEMBLY (w/o Airbag System)

  1. B134684E01
    Remove the 2 hog rings and 3 hooks.

  1. Remove the front seatback assembly.


14. REMOVE FRONT SEATBACK ASSEMBLY (w/ Airbag System)

  1. B134684E01
    Remove the 2 hog rings and 3 hooks.

  1. B165264
    Remove the nut and 2 seatback cover brackets.

  1. Remove the front seatback assembly.


15. REMOVE FRONT SEPARATE TYPE SEATBACK COVER

  1. B134686E01
    Remove the 10 hog rings and front separate type seatback cover from the seatback pad.


16. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY

  1. B146666E01
    Disconnect the connector.

  1. Remove the 2 screws and lumbar support adjuster assembly.


17. REMOVE RECLINING ADJUSTER INSIDE COVER RH
  1. Disconnect the harness.

  1. B148652
    Remove the screw and lower reclining adjuster inside cover RH.


18. REMOVE RECLINING ADJUSTER INSIDE COVER LH
  1. Disconnect the harness.

  1. B148653
    Remove the screw and reclining adjuster inside cover LH.


19. REMOVE SEAT RECLINING ADJUSTER INSIDE COVER RH

  1. B148631
    Remove the screw.

  1. Detach the claw and remove the seat reclining adjuster inside cover RH.


20. REMOVE SEAT RECLINING ADJUSTER INSIDE COVER LH

  1. B148632
    Remove the screw.

  1. Detach the claw and remove the seat reclining adjuster inside cover LH.


21. REMOVE FRONT LOWER SEAT CUSHION SHIELD LH

  1. B148633
    Remove the screw and detach the hook of the front lower seat cushion shield LH.


22. REMOVE FRONT LOWER SEAT CUSHION SHIELD RH

  1. B148634
    Remove the screw and detach the hook of the front lower seat cushion shield RH.


23. REMOVE FRONT SEPARATE TYPE SEATBACK SPRING ASSEMBLY

  1. B148635E01
    Disconnect the connector and detach the 3 clamps.

  1. B148636
    Remove the 4 bolts and front separate type seatback spring assembly.


24. REMOVE SEAT POSITION SENSOR (for Driver Side)

  1. C133891
    Disconnect the connector.

  1. Using a "TORX" socket (T30), remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.

  1. C133892
    Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.


25. REMOVE FRONT SEAT WIRE
  1. Detach the each clamp and each claw and remove the front seat wire.

← DISASSEMBLY (Oct 2006 – May 2009)REASSEMBLY (Oct 2006 – May 2009) →