2006-2011 Camry Aurion · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

HINT:
A bolt without a torque specification is shown in the standard bolt chart. (Click here)


1. INSTALL REAR BENCH TYPE SEATBACK COVER (for Except Sports Seat Type)

NOTICE:
  1. Be careful not to damage the cover.
  2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. Using hog ring pliers, install 20 new hog rings.

    B140586E01

  1. Using hog ring pliers, install the rear bench type seatback cover to the seatback frame (with pad) with 50 new hog rings.

    B251856E01


2. INSTALL BENCH TYPE REAR SEAT BACK COVER (for Sports Seat Type)

NOTICE:
  1. Be careful not to damage the cover.
  2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. Using hog ring pliers, install 26 new hog rings.

    B148910E01

  1. Using hog ring pliers, install the rear bench type seatback cover to the seatback frame (with pad) with 46 new hog rings.

    B251857E01


3. INSTALL REAR SEAT HEADREST SUPPORT

  1. Engage the 2 claws and install each rear seat headrest supports.

    B251853


4. INSTALL REAR SEAT SHOULDER BELT GUIDE RH

  1. B136586
    Install the rear seat shoulder belt guide RH with the 2 screws.


5. INSTALL REAR SEAT SHOULDER BELT GUIDE LH

HINT:
Use the same procedure for the RH and LH side.


6. INSTALL INNER CENTER SEAT ARMREST PLATE

  1. B136584
    Engage the 11 claws and install the center seat inner armrest plate.


7. INSTALL CUP HOLDER

  1. B136583
    Install the cup holder with the 2 screws.

  1. B136582
    Install the 2 mats.


8. INSTALL CENTER SEAT ARMREST BRACKET SUB-ASSEMBLY

  1. B136581
    Install the center seat armrest bracket sub-assembly with the 2 bushes and 2 bolts.


9. INSTALL ARMREST ASSEMBLY

  1. B136580
    Engage the 2 claws and install the armrest assembly with the 2 nuts.


10. INSTALL REAR BENCH TYPE SEAT CUSHION COVER (for Except Sports Seat Type)

NOTICE:
  1. Be careful not to damage the cover.
  2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. Using hog ring pliers, install 14 new hog rings.

    B165293E01

  1. Using hog ring pliers, install the rear seat cushion cover to the rear seat cushion pad with 36 new hog rings.

    B140588E01


11. INSTALL REAR BENCH TYPE SEAT CUSHION COVER (for Sports Seat Type)

NOTICE:
  1. Be careful not to damage the cover.
  2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. Using hog ring pliers, install 12 new hog rings.

    B165294E01

  1. Using hog ring pliers, install the rear seat cushion cover to the rear seat cushion pad with 36 new hog rings.

    B148683E01

← REASSEMBLY (Oct 2006 – May 2009)INSTALLATION (from Jun 2006) →