TERMINALS OF ECM
System information · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
| ECM |


- HINT:
- Each ECM terminal's standard voltage is shown in the table below.
- In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to inspected. The standard voltage between the terminals is shown under "Specific Condition".
- Use the illustration above as a reference for the ECM terminals.
| Symbols (Terminals No.) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| D (C24-56) - E1 (C24-104) |
G - W-B |
D shift position switch signal |
Ignition switch on (IG) and shift lever D and 4 position |
10 to 14 V |
| Ignition switch on (IG) and shift lever except D and 4 position |
Below 1 V |
|||
| R (C24-53) - E1 (C24-104) |
P - W-B |
R shift position switch signal |
Ignition switch on (IG) and shift lever R position |
10 to 14 V |
| Ignition switch on (IG) and shift lever except R position |
Below 1 V |
|||
| SPD (A24-8) - E1 (C24-104) |
L - W-B |
Speed signal |
Vehicle speed 20 km/h (12mph) |
Pulse generation (See waveform 8) |
| STP (A24-36) - E1 (C24-104) |
W - W-B |
Stop light switch signal |
Brake pedal is depressed |
7.5 to 14 V |
| Brake pedal is released |
Below 1.5 V |
|||
| 4 (A24-25) - E1 (C24-104) |
G - W-B |
4 shift position switch signal |
Ignition switch on (IG) and shift lever 4 position |
10 to 14 V |
| Ignition switch on (IG) and shift lever except 4 position |
Below 1 V |
|||
| 3 (A24-26) - E1 (C24-104) |
G - W-B |
3 shift position switch signal |
Ignition switch on (IG) and shift lever 3 position |
10 to 14 V |
| Ignition switch on (IG) and shift lever except 3 position |
Below 1 V |
|||
| 2 (C24-55) - E1 (C24-104) |
V - W-B |
2 shift position switch signal |
Ignition switch on (IG) and shift lever 2 and L position |
10 to 14 V |
| Ignition switch on (IG) and shift lever except 2 and L position |
Below 1 V |
|||
| L (C24-74) - E1 (C24-104) |
BR - W-B |
L shift position switch signal |
Ignition switch on (IG) and shift lever L position |
10 to 14 V |
| Ignition switch on (IG) and shift lever except L position |
Below 1 V |
|||
| P (C24-73) - E1 (C24-104) |
GR - W-B |
Park position switch signal |
Ignition switch on (IG) and shift lever P position |
10 to 14 V |
| Ignition switch on (IG) and shift lever except P position |
Below 1 V |
|||
| N (C24-54) - E1 (C24-104) |
SB - W-B |
Neutral position switch signal |
Ignition switch on (IG) and shift lever N position |
10 to 14 V |
| Ignition switch on (IG) and shift lever except N position |
Below 1 V |
|||
| NSW (C24-52) - E1 (C24-104) |
SB - W-B |
Park neutral switch signal |
Ignition switch on (IG) and shift lever P and N position |
Below 2 V |
| Ignition switch on (IG) and shift lever except P and N position |
10 to 14 V |
|||
| DSL (C24-79) - E1 (C24-104) |
BR - W-B |
DSL solenoid signal |
Vehicle speed 65 km/h (40mph), lock-up (ON to OFF) |
Pulse generation (See waveform 2) |
| SR (C24-80) - E1 (C24-104) |
G - W-B |
SR solenoid signal |
Ignition switch on (IG) |
Below 1 V |
| 3rd, 4th or 5th gear |
10 to 14 V |
|||
| 1st or 2nd gear |
Below 1 V |
|||
| S4 (C24-78) - E1 (C24-104) |
GR - W-B |
S4 solenoid signal |
Ignition switch on (IG) |
Below 1 V |
| 5th gear |
10 to 14 V |
|||
| Except 5th gear |
Below 1 V |
|||
| SL3+ (C24-60) - SL3- (C24-61) |
BE - Y |
SL3 solenoid signal |
Engine idle speed |
Pulse generation (See waveform 3) |
| SL2+ (C24-58) - SL2- (C24-59) |
G - R |
SL2 solenoid signal |
Engine idle speed |
Pulse generation (See waveform 4) |
| SL1+ (C24-57) - SL1- (C24-77) |
L - LG |
SL1 solenoid signal |
Engine idle speed |
Pulse generation (See waveform 5) |
| NC+ (C24-101) - NC- (C24-102) |
LG - P |
Speed sensor (NC) signal |
Vehicle speed 30 km/h (19mph): (3rd gear) Engine speed 1,400 rpm |
Pulse generation (See waveform 6) |
| NT+ (C24-125) - NT- (C24-124) |
G - W |
Speed sensor (NT) signal |
Vehicle speed 20 km/h (12mph) |
Pulse generation (See waveform 7) |
| SLT+ (C24-76) - SLT- (C24-75) |
L - W |
SLT solenoid signal |
Engine idle speed |
Pulse generation (See waveform 1) |
| THO1 (C24-72) - ETHO (C24-95) |
Y - BR |
ATF temperature sensor signal |
ATF temperature: 115°C (239°F) or more |
Below 1.5 V |
Waveform 1

Reference: Terminal
SLT+ - SLT-
Tool setting
5 V/DIV., 1ms./DIV.
Vehicle condition
Engine idle speed
Waveform 2

Reference: Terminal
DSL - E1
Tool setting
10 V/DIV., 100ms./DIV.
Vehicle condition
Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)
Waveform 3

Reference: Terminal
SL3+ - SL3-
Tool setting
5 V/DIV., 1ms./DIV.
Vehicle condition
Engine idle speed
Waveform 4

Reference: Terminal
SL2+ - SL2-
Tool setting
5 V/DIV., 1ms./DIV.
Vehicle condition
Engine idle speed
Waveform 5

Reference: Terminal
SL1+ - SL1-
Tool setting
5 V/DIV., 1ms./DIV.
Vehicle condition
Engine idle speed
Waveform 6

Reference: Terminal
NC+ - NC-
Tool setting
1 V/DIV., 1ms./DIV.
Vehicle condition
Vehicle speed 30 km/h (19 mph): (3rd gear)
Engine speed 1.400 rpm
Waveform 7

Reference: Terminal
NT+ - NT-
Tool setting
5 V/DIV., 0.5ms./DIV.
Vehicle condition
Vehicle speed 20 km/h (12 mph)
Waveform 8

Reference: Terminal
SPD - E1
Tool setting
5 V/DIV., 20ms./DIV.
Vehicle condition
Vehicle speed 20 km/h (12 mph)
- HINT:
- Depending on the vehicle, the output waveform voltage, influenced by optionally installed systems, may become 5V.