2006-2011 Camry Aurion · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT FRONT SEAT FRAME WITH ADJUSTER LH (for LHD)

B081621E19
  1. Check operation of the slide motor.

    1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → U1-1
      Battery negative (-) → U1-2
      Forward
      Battery positive (+) → U1-2
      Battery negative (-) → U1-1
      Backward

  1. B081621E20
    Check operation of the front vertical motor.

    1. Check if the seat frame moves smoothly when the battery is connected to the front vertical motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → U2-1
      Battery negative (-) → U2-2
      Upward
      Battery positive (+) → U2-2
      Battery negative (-) → U2-1
      Downward

  1. B081621E22
    Check operation of the lifter motor.

    1. Check if the seat frame moves smoothly when the battery is connected to the lifter motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → U4-2
      Battery negative (-) → U4-1
      Upward
      Battery positive (+) → U4-1
      Battery negative (-) → U4-2
      Downward

  1. B081621E37
    Check operation of the reclining motor.

    1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → k1-2
      Battery negative (-) → k1-1
      Forward
      Battery positive (+) → k1-1
      Battery negative (-) → k1-2
      Backward

      If the result is not as specified, replace the seat frame with adjuster.


INSPECT FRONT SEAT FRAME WITH ADJUSTER RH (for RHD)

B081621E33
  1. Check operation of the slide motor.

    1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → T1-2
      Battery negative (-) → T1-1
      Forward
      Battery positive (+) → T1-1
      Battery negative (-) → T1-2
      Backward

  1. B081621E34
    Check operation of the front vertical motor.

    1. Check if the seat frame moves smoothly when the battery is connected to the front vertical motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → T2-2
      Battery negative (-) → T2-1
      Upward
      Battery positive (+) → T2-1
      Battery negative (-) → T2-2
      Downward

  1. B081621E36
    Check operation of the lifter motor.

    1. Check if the seat frame moves smoothly when the battery is connected to the lifter motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → T4-1
      Battery negative (-) → T4-2
      Upward
      Battery positive (+) → T4-2
      Battery negative (-) → T4-1
      Downward

  1. B081621E40
    Check operation of the reclining motor.

    1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → j1-2
      Battery negative (-) → j1-1
      Forward
      Battery positive (+) → j1-1
      Battery negative (-) → j1-2
      Backward

      If the result is not as specified, replace the seat frame with adjuster.


INSPECT FRONT SEAT FRAME WITH ADJUSTER LH (for RHD)

B081621E19
  1. Check operation of the slide motor.

    1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → U1-1
      Battery negative (-) → U1-2
      Forward
      Battery positive (+) → U1-2
      Battery negative (-) → U1-1
      Backward

  1. B081621E37
    Check operation of the reclining motor.

    1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → k1-2
      Battery negative (-) → k1-1
      Forward
      Battery positive (+) → k1-1
      Battery negative (-) → k1-2
      Backward

      If the result is not as specified, replace the seat frame with adjuster.


INSPECT FRONT SEAT FRAME WITH ADJUSTER RH (for LHD)

  1. B081621E33
    Check operation of the slide motor.

    1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → T1-2
      Battery negative (-) → T1-1
      Forward
      Battery positive (+) → T1-1
      Battery negative (-) → T1-2
      Backward

  1. B081621E40
    Check operation of the reclining motor.

    1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → j1-2
      Battery negative (-) → j1-1
      Forward
      Battery positive (+) → j1-1
      Battery negative (-) → j1-2
      Backward

      If the result is not as specified, replace the seat frame with adjuster.

← INSTALLATION (from Jun 2009)COMPONENTS (from Jun 2006) →