2006-2011 Camry Aurion · Service Manual COMMUNICATION SYSTEM

FAIL-SAFE CHART

System information · Vehicles built from Oct 2006


FAIL-SAFE FUNCTION
  1. When communication fails in any of the CAN bus wires (communication wires) due to a short circuit or other causes, the fail-safe function, which is specified for each system, operates to prevent the system from malfunctioning.

  2. The following chart shows the relationships between components, system functions, and effects of communication failure on these functions. (For further details, see the pages for each system.)

    Function
    (Function Description)
    Control Master
    System Related
    Fail-safe Operation
    DTC
    (Driver Detectable)
    VSC control
    (Controls driving force while VSC in operation)
    Skid Control ECU
    1. ECM
    2. Steering Angle Sensor
    3. Yaw Rate Sensor
    VSC control is inoperative
    (VSC control gradually stops)
    U0073, U0100, U0123, U0124, U0126
    (VSC warning Light comes on)
    ABS control
    (Control driving force while ABS in operation)
    Skid Control ECU
    Yaw Rate Sensor
    Control inoperative
    (gradually stops controlling during ABS control)
    U0073, U0129
    (Warning light comes on)
    Buzzer control
    Combination Meter
    1. ECM
    2. Skid Control ECU
    3. Center Airbag Sensor Assembly
    4. Certification ECU
    5. Main Body ECU
    Buzzer function stops
    U0100, U0129
    (Buzzer does not sound)
    Meter display (Displays operation condition and DTCs)
    Combination Meter
    1. ECM
    2. Skid Control ECU
    3. Center Airbag Sensor Assembly
    4. Certification ECU
    5. Main Body ECU
    Light does not come on, illuminates abnormally, or blinks abnormally
    U0100, U0129
    (Abnormal light illumination)
    Air conditioning control
    Air Conditioning Amplifier
    1. ECM
    2. Combination Meter
    3. Main Body ECU
    Air conditioning function and PTC heater function stop
    B1499
    (Air Conditioning inoperative)
    Illumination control
    Main Body ECU
    1. ECM
    2. Combination Meter
    3. Clearance Warning ECU
    Light illumination rheostat inoperative
    None
    (Rheostat inoperative)
    Smart entry / Power door lock control
    Certification ECU
    1. Combination Meter
    2. Main Body ECU
    Unlock permitted
    B1207, B2326
    (Wireless door lock cannot operate.)
    Security function
    Certification ECU
    Main Body ECU
    Security function is inoperative (Theft deterrent system cannot be set)
    B1207, B2326
    (Security indicator light does not come on)
    Clearance sonar function (Informs driver when an obstacle is detected)
    Clearance Warning ECU
    1. ECM
    2. Combination Meter
    3. Main Body ECU
    Clearance sonar function stops
    None
    (Clearance sonar main switch indicator does not come on)
    CAN MS bus monitoring function
    Main Body ECU
    Certification ECU
    Communication error is detected
    B1207, B2326
    (Not detectable)

← DIAGNOSIS SYSTEM (from Jun 2009)DIAGNOSTIC TROUBLE CODE CHART (Oct 2006 – May 2009) →