FAIL-SAFE CHART
System information · Vehicles built from Oct 2006
| FAIL-SAFE FUNCTION |
When communication fails in any of the CAN bus wires (communication lines) due to a short circuit or other causes, a fail-safe function(s) will operate. The fail-safe function that is specified for each system operates to prevent those systems from malfunctioning.
Relationships between components, system functions, and effects of communication failure on these functions. (For further details, see the pages for each system.)
Function
Control Master
System Related
Condition When Communication Impossible
DTC Detection (Driver Detectable)
ABS control (Controls driving force while ABS in operation)
Skid Control ECU
-
Control is inoperative (ABS control gradually stops)
U0073 (ABS warning light comes on)
Air conditioning control
Air Conditioning Amplifier
- ECM
- Combination Meter
- Main Body ECU
Air conditioning function stops
None (Air conditioning inoperative)
Meter display (Displays operation condition and DTCs)
Combination Meter
- ECM
- Skid Control ECU
- Center Airbag Sensor Assembly
- Main Body ECU
Light does not come on, illuminates abnormally, or blinks abnormally
U0100, U0129 (Abnormal display)
Buzzer control
Combination Meter
- ECM
- Center Airbag Sensor Assembly
- Main Body ECU
Buzzer function stops
U0100, U0129 (Buzzer does not sound)
Illumination control
Main Body ECU
- ECM
- Combination Meter
Light illumination rheostat inoperative
None (Rheostat inoperative)
- ECM