HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
Use these procedures to troubleshoot the rear sunshade system.| 1.VEHICLE BROUGHT TO WORKSHOP |
| NEXT |
|
 |
|
|
| 2.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
| NEXT |
|
 |
|
|
Refer to the problem symptoms table (Click here).
- Result:
Result
|
Proceed to
|
Fault not listed in problem symptoms table
|
A
|
Fault listed in problem symptoms table
|
B
|
|
B.
|
 |
|
|
| A |
|
 |
|
|
| 4.OVERALL ANALYSIS AND TROUBLESHOOTING |
Terminals of ECU (Click here)
Circuit Inspection (Click here and Click here)
| NEXT |
|
 |
|
|
| NEXT |
|
 |
|
|
| NEXT |
|
 |
|
|