ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jun 2006
| INSPECT DEFOGGER RELAY (Marking: RR DEF) |
Measure the resistance according to the value(s) in the table below.

- Standard resistance:
Tester Condition
Specified Condition
3 - 4
Below 1 Ω
(when battery voltage is not applied between terminals)
3 - 5
10 kΩ or higher
(when battery voltage is not applied between terminals)
3 - 5
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
