2006-2011 Camry Aurion · Service Manual BODY

ADJUSTMENT

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009

B146067E01

HINT:
  1. Centering bolts are used to mount the door hinge to the door. The door cannot be adjusted with the centering bolts on. Substitute the centering bolts with standard bolts (with washers) when making adjustments.
  2. A bolt without a torque specification is shown in the standard bolt chart (Click here).


1. REMOVE LUGGAGE COMPARTMENT DOOR COVER

  1. B135465
    Using a clip remover, remove the 13 clips and luggage compartment door cover.


2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

3. REMOVE SPARE WHEEL COVER CLAMP

4. REMOVE SPARE WHEEL COVER ASSEMBLY

5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

  1. B136879
    Remove the 2 screws and the 2 No. 1 luggage compartment trim hooks.


6. REMOVE REAR FLOOR FINISH PLATE

  1. B136852
    Disengage the 7 clips and remove the rear floor finish plate.


7. ADJUST LUGGAGE COMPARTMENT DOOR

  1. B136494
    Horizontally and vertically adjust the door by loosening the door side hinge bolts.

    Torque:
    7.5 N*m{ 77 kgf*cm , 66 in.*lbf }

  1. B136495
    Adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic hammer.

  1. Tighten the striker mounting screws after the adjustment.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }


8. INSTALL REAR FLOOR FINISH PLATE

  1. B136852
    Engage the 7 clips and install the rear floor finish plate.


9. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

  1. B136879
    Install the 2 No. 1 luggage compartment trim hooks with the 2 screws.


10. INSTALL SPARE WHEEL COVER ASSEMBLY

11. INSTALL SPARE WHEEL COVER CLAMP

12. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

13. INSTALL LUGGAGE COMPARTMENT DOOR COVER

  1. B135465
    Install the luggage compartment door cover with the 13 clips.

← DISASSEMBLY (from Jun 2009)ADJUSTMENT (from Jun 2009) →