2006-2011 Camry Aurion · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT SEAT MEMORY SWITCH

  1. B149681E01
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Position
    Specified Condition
    E88-1 (MRY) - E88-4 (E)
    SET switch is pressed
    Below 1 Ω
    SET switch is not pressed
    10 kΩ or higher
    E88-3 (M2) - E88-4 (E)
    M2 switch is pressed
    Below 1 Ω
    M2 switch is not pressed
    10 kΩ or higher
    E88-2 (M1) - E88-4 (E)
    M1 switch is pressed
    Below 1 Ω
    M1 switch is not pressed
    10 kΩ or higher

  1. If the result is not as specified, replace the seat memory switch.

← REMOVAL (from Oct 2006)INSTALLATION (from Oct 2006) →