2006-2011 Camry Aurion · Service Manual BODY

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT LUGGAGE COMPARTMENT DOOR PANEL SUB-ASSEMBLY

  1. Check that the clearance measurements of areas A through F are within each standard range.

    B149069E01

    Standard clearance:
    Area
    Measurement
    Area
    Measurement
    A
    7.6 mm (0.299 in.)
    D
    3.8 to 7.8 mm (0.150 to 0.307 in.)
    B
    2.0 to 5.0 mm (0.079 to 0.197 in.)
    E
    2.0 to 5.0 mm (0.079 to 0.197 in.)
    C
    -1.5 to 1.5 mm (-0.059 to 0.059 in.)
    F
    -1.5 to 1.5 mm (-0.059 to 0.059 in.)

← COMPONENTS (from Jun 2009)DISASSEMBLY (Jun 2006 – May 2009) →