2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

  1. E121521E03
    Connect the 3 dry cell batteries (1.5 V) in series.

  1. Connect the positive (+) lead from the battery to terminal 3, and the negative (-) lead from the battery to terminal 1.

  1. Measure the voltage between terminals 2 and 1 while slowly moving the link up and down.

    Standard voltage:
    Tester Connection
    Condition
    Specified Condition
    2 (SHRR) - 1 (SHG)
    +45° (High)
    Approx. 4.05 V
    0° (Normal)
    Approx. 2.25 V
    -45° (Low)
    Approx. 0.45 V

    If the result is not as specified, replace the rear height control sensor sub-assembly.

← REMOVAL (from Oct 2006)INSTALLATION (Oct 2006 – May 2009) →