2006-2011 Camry Aurion · Service Manual RESTRAINTS

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

HINT:
  1. Use the following procedures to troubleshoot the seat belt warning system.
  2. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
    NEXT

    3.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM (CAN)*
    1. Use the intelligent tester to check if the CAN communication system (CAN) is functioning normally.

      Result:
      Result
      Proceed to
      CAN DTC is not output
      A
      CAN DTC is output
      B


    B.
    A

    4.PROBLEM SYMPTOMS TABLE

      HINT:
      Click here.

    NEXT

    5.OVERALL ANALYSIS AND TROUBLESHOOTING*
    1. DATA LIST / ACTIVE TEST (Click here).

    2. Terminals of ECU (Click here).

    3. On-vehicle Inspection (Click here).

    NEXT

    6.REPAIR OR REPLACE
      NEXT

      7.CONFIRMATION TEST
        NEXT

        ← SYSTEM DESCRIPTION (from Jun 2009)HOW TO PROCEED WITH TROUBLESHOOTING (Oct 2006 – May 2009) →