DTC CHECK / CLEAR
Troubleshooting · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 from Oct 2006
| CHECK DTC |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
Check the DTC(s).
| CLEAR DTC |
![]() ![]() |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
Clear the DTCs.
Check that "DTCs are cleared" is displayed.
- NOTICE:
- If any DTCs are output, troubleshoot those DTCs again.

