2006-2011 Camry Aurion · Service Manual BODY

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT ROOF CONSOLE BOX ASSEMBLY

  1. B131165E02
    Remove the roof console box assembly.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Position
    Specified Condition
    Q6-1 (CLS) - Q6-3 (GND)
    CLOSE
    Below 100 Ω
    Q6-2 (OPN) - Q6-3 (GND)
    OPEN
    Below 100 Ω
    Q6-4 (DOWN) - Q6-3 (GND)
    DOWN
    Below 100 Ω
    Q6-5 (UP) - Q6-3 (GND)
    UP
    Below 100 Ω
    Q6-1 (CLS) - Q6-3 (GND)
    OPEN
    1 kΩ or higher
    Q6-2 (OPN) - Q6-3 (GND)
    CLOSE
    1 kΩ or higher
    Q6-4 (DOWN) - Q6-3 (GND)
    UP
    1 kΩ or higher
    Q6-5 (UP) - Q6-3 (GND)
    DOWN
    1 kΩ or higher

    If the result is not as specified, replace the roof console box assembly.

← INSTALLATION (from Jun 2009)PRECAUTION (Jun 2006 – Sep 2006) →